metabo_hpt_compressor
Differences
This shows you the differences between two versions of the page.
| metabo_hpt_compressor [2024/04/22 12:20] – created wilfred | metabo_hpt_compressor [2024/04/22 12:21] (current) – wilfred | ||
|---|---|---|---|
| Line 2: | Line 2: | ||
| * The metabo HPT is one of the compressors in the lab | * The metabo HPT is one of the compressors in the lab | ||
| * Fittings for the compressor are found in the blue shelves; the compressor uses Quick Connect connectors with adapters to threaded components | * Fittings for the compressor are found in the blue shelves; the compressor uses Quick Connect connectors with adapters to threaded components | ||
| - | * **Note**: if the compressor does not turn on, it is recommended to first try to drain the tank by slowly opening the valve on the underside of the tank | + | * **Note**: if the compressor does not turn on, it is recommended to first try to drain the tank by slowly opening the valve on the underside of the tank-place a container underneath the valve opening to collect any condensation contained within the tank (you can slowly tilt the compressor to drain any fluid) |
| * Other troubleshooting details are available [[https:// | * Other troubleshooting details are available [[https:// | ||
metabo_hpt_compressor.1713802817.txt.gz · Last modified: 2024/04/22 12:20 by wilfred