Differences

This shows you the differences between two versions of the page.

--- lab_equipment [2023/04/24 13:43] – created ajung
+++ lab_equipment [2024/01/01 13:42] (current) – ajung
@@ Line 1: / Line 1: @@
-This is a **public listing** of some of the equipment available at the RAISE Lab. Lab-specific information about each piece of equipment etc. is in their respective private wiki pages.
+====== RAISE Lab Equipment ======
+This is a **public listing** of some of the equipment available at the RAISE Lab. Lab-specific information about each piece of equipment etc. is in their respective private links and wiki pages.
+The list of equipment accessible to RAISE Lab members through other labs and our affiliations (e.g., Retail Innovation Lab) are not included here.
+====== Robots ======
+  * [[https://drive.google.com/drive/folders/1xdWVydjYUIm-rcmKK2b7KQ8bqX_oQ1ef?usp=share_link|Jibo]]
+  * [[https://drive.google.com/drive/folders/1hH-X8CQfu_DLE27jHnirg2OgvUHXKPur?usp=share_link|Franka Emika Panda Robot]]
+  * Franka Emika Research 3
+  * [[https://drive.google.com/drive/folders/1LaV0QwXB5729bUNvTBjHgUZJ9-lYHPY8?usp=share_link|Ohmni Telepresence Robot]]
+  * [[https://drive.google.com/drive/folders/14kcO_QXlIG3BA3ul78vUZVQAmpv_FVGH?usp=share_link|2x Stretch 2 Robot]]
+====== Sensors ======
+  * 2 x optitrack camera flex 13
+  * Velodyne Lidar Sensor
+  * SICK 2D Laser Sensor
+  * Polemus Patriot 6DoF Motion sensor
+====== Actuators ======
+  * Directed Perception Pan-Tilt Unit with Controller
+====== Computers & peripheral accessories ======
+See [[computers|Lab Computers & peripheral accessories]]
+====== 3D Printing ======
+The ECE department has a 3D printing service available as of Oct. 2023. Check out their [[https://www.mcgill.ca/ece/department/it-and-technical-services/technical-services-faqs|website]] for more info.